Understand conversion and video statuses

Updated Oct 29, 2026 · 9 min read · All plans

This article explains what PlayerMagick does to your video after you upload it, what each status in Videos means, and what to do when a conversion fails.

What "Make stream-ready" does

A video file from your editing tool is made for watching from start to finish on one device. A sales page needs something different: the video must start in about a second, on a phone on a train as well as on a fast office connection.

So after the upload, PlayerMagick:

  • Makes several sizes of your video, from small (360p) up to 4K (2160p). The player picks the best size for each visitor's screen and connection, and switches while the video plays if the connection changes. 4K plays only where it makes a difference: in a large player, on a sharp screen, on a fast connection. A small player on a sales page never downloads 4K. A size is never bigger than your original: a 1080p upload gets 360p, 480p, 720p and 1080p, never a blown-up 4K.
  • Cuts each size into short pieces of a few seconds, so playback can start after the first piece instead of waiting for the whole file. This is called HLS, the streaming format used by most video sites.
  • Creates a thumbnail picture automatically, taken 3 seconds into the video.
  • Levels the sound to a standard loudness (−16 LUFS), when Level the sound is on for the video: new videos follow Settings → Plan and usage → Defaults for new videos, which is on unless you turn it off. It costs nothing extra. See Set the start volume and level the sound.
  • Creates a short silent loop of 5 seconds, which you can use as a moving thumbnail. See Choose what visitors see before they press play.
  • Saves everything in your storage, next to your original file.

It also takes care of things that often go wrong with phone and camera files:

  • Phone videos filmed upright come out upright.
  • Vertical (9:16) videos stay vertical and sharp.
  • Videos filmed in HDR (the default on recent iPhones and many other phones) get two versions: an HDR version for screens that can show HDR (recent iPhones, iPads and Macs, and HDR monitors in Chrome and Edge), and a standard-colour version for every other screen, so they never look washed out. The player picks one for each screen and keeps it for the whole video.
  • Videos without sound play normally.

Statuses

Statuses in Videos and in the editor's top bar change on their own, without reloading the page.

StatusWhat it meansWhat to do
"Uploading 37%"The file is being copied into your storage.Keep the tab open until it reaches Make stream-ready. See Upload a video.
"Upload interrupted"The upload stopped because the tab was closed or reloaded.Click Choose the file again (it starts over) or Delete.
"Importing…" or "Importing 45%"PlayerMagick is copying the file from the link you pasted into your storage.Nothing; you can close the page. Cancel import stops it. See Import videos from links.
"Could not import"The file could not be copied from its link. A one-line reason is shown.Fix the cause and click Try again, or Upload the file instead. See Import videos from links.
"Converting 64%"The video is being made stream-ready. The number is how far along it is. It shows "Converting 0%" while it waits for its turn.Wait. You can already set up the video's look and behaviour.
"Conversions paused · resumes Nov 1"Conversions are paused for your account until the date shown. This is rare. The file is safe in your storage, and your other videos keep playing.Nothing. It starts on its own on the date shown. Write to support if you need it sooner.
ReadyEverything is done.Embed it: see Embed a video on your sales page.
"Could not convert"The file could not be converted. A one-line reason is shown.See below. Use Replace file or Delete (see Upload a video).
"Storage disconnected"Own storage only: the bucket the video is in was disconnected. The video does not play.Connect the bucket again. See Manage your storage connections.

How long converting takes: . While it converts, the row may also show roughly how long is left. If something goes wrong on our side, PlayerMagick tries again on its own: it makes up to three attempts in total before showing "Could not convert".

Why a conversion can fail, and what to do

Likely reasonWhat to do
The file is damaged or incomplete (for example the export or copy stopped halfway).Export the video again and click Replace file.
The file is not a video (for example an audio file or a document with a video file name).Choose the right file with Replace file.
The video uses a format PlayerMagick cannot read, such as some camera RAW formats.Export it as an H.264 MP4 file (every editing tool offers this) and click Replace file.
The video is longer than 6 hours.Split it into parts and upload each part.
The file is larger than 20 GB.Export it again with a lower bitrate or as H.264 MP4.
Own storage only: PlayerMagick could not access your bucket (for example the key was deleted at your provider). The reason links to Settings → Storage.Go to Settings → Storage, click Test now, and fix the connection, for example with Replace keys. As soon as a test of that bucket passes, these videos start converting again on their own. You can also click Try again on the video once the connection works.
"The connection to your storage dropped while converting. Your file is fine."Click Try again when it is offered. Otherwise click Replace file and choose the same file: you do not need to export it again.
"Something went wrong on our side, not with your file."Click Try again when it is offered. Otherwise click Replace file and choose the same file. If it happens again, contact support.

The one-line reasons shown in Videos:

Reason shownWhen
"The file is damaged or incomplete. Export the video again and click Replace file."The file could not be read.
"This file is not a video. Choose the right file with Replace file."No video in the file.
"The video uses a format PlayerMagick cannot read. Export it as an H.264 MP4 file and click Replace file."An unusual format.
"The video is longer than 6 hours. Split it into parts and upload each part."Too long.
"The file is larger than 20 GB. Export it again with a lower bitrate or as H.264 MP4."Too large.
"PlayerMagick could not access your storage. Go to Settings → Storage, click Test now and fix the connection."Own storage only: your bucket refused access.
"The connection to your storage dropped while converting. Your file is fine. …"The connection to your storage broke during the conversion.
"Something went wrong on our side, not with your file. …"A problem on PlayerMagick's side.

For a reason the app does not recognise, it shows: "Export the video again as an H.264 MP4 file and click Replace file." Problems on our side or on the way to your storage never ask you to export again.

Use Replace file when the file itself needs to change. Try again converts the same file again; it is offered when the problem was not the file.

You can still open the editor for a video that could not be converted, and set it up while you prepare a new file.

Replacing a video's file

Replace file uploads a new file for the same video. Your settings, your embed code and your statistics stay the same, so you do not need to change your page.

  • Nothing is overwritten. The new file is saved next to the old one.
  • Your page keeps playing the old version while the new file uploads and converts. The row shows the progress, for example "Converting 40%", with a note that your page plays the previous version until this one is ready.
  • When the new version is ready, your page switches to it on its own, within seconds.
  • If the new file cannot be converted, the row shows "Could not convert the new file" with Replace file. Your page keeps playing the old version, so nothing breaks.
  • If you replace the file again while the previous replacement is still converting, the previous one is stopped and only the newest file is used.
  • If the new file has a different shape (for example vertical instead of widescreen), the Publish tab asks you to copy the code again, so your page reserves the right space. Copy it and paste it on your page.
  • Buttons, gates and page reveals stay. If the new video is shorter, items after its end are marked "After the end of the video" on the Timeline and are not shown. See Edit a video and save your changes.
  • Cleanup: the old version and the old original file are removed from your storage 7 days after the new version became ready, never earlier.
  • Convert again now (in the Behavior tab, after turning Level the sound on or off) converts the current file again in the same way: your page keeps the old version until the new one is ready. See Convert a video again.
  • Statistics: plays, play rate and average watched in Analytics add up the old and the new file. The Who is still watching chart starts again with the new file, with a note such as "Since Nov 14, when the file was replaced." See Find where viewers stop watching.

If you add or correct subtitles, the new subtitle file is used right away; visitors never see the old text from a cached copy.

Conversion is included

Converting your videos is included in every plan and never costs extra: 720p, 4K or HDR, a new upload, a replaced file or a video converted again to level its sound.

Each plan converts a few videos at the same time: Starter 1, Pro 2, Business 3, Agency 4. Other videos wait their turn, showing "Converting 0%", and start on their own.

How much storage a video uses

A video counts toward your storage at the size of the file you uploaded. See How PlayerMagick stores your videos.

Was this article helpful?