Recognise viewers from your emails

Updated Oct 24, 2026 · 8 min read · Pro, Business and Agency plans

This article shows you how to add a code to your email links, so PlayerMagick knows which subscriber is watching and your automations can act for them.

Available on: Pro, Business and Agency plans.

How it works

  1. In your email tool, you add a code to the end of every link to your sales page, for example ?pm_kit={{ subscriber.id }}.
  2. Your email tool fills in each subscriber's own code when it sends the email.
  3. When the subscriber clicks and plays your video, PlayerMagick reads the code, checks it with your email tool, remembers the viewer on your site, and runs your automations for them.

Only people who come from your emails or enter their email in a gate (or a funnel question) are recognised. Everyone else stays anonymous, and their statistics stay anonymous.

To open the page, click Automations in the main menu, then Recognise viewers from your emails. The bar Who can be recognised: on the Automations page shows what is set up, for example "People who came from Kit emails", or "Mailchimp links not set up yet".

Before you start

Connect your email tool in Settings → Integrations: "codes are read only for connected tools." See Send your leads to your email tool.

Step 1: Copy the code for your email tool

  1. On Recognise viewers from your emails, under The code for your email tool, choose your tool.
  2. Keep Subscriber code selected (recommended: "Links carry a code, not an email address.").
  3. Click Copy.

The codes are:

  • Kit:

    ?pm_kit={{ subscriber.id }}

    No typing: in Kit, turn on "Add subscriber_id parameter in email links". Kit then adds ck_subscriber_id to every link, and PlayerMagick reads that too.

  • Mailchimp:

    ?pm_mc=*|UNIQID|*
  • ActiveCampaign:

    ?pm_ac=%SUBSCRIBERID%
  • GetResponse:

    ?pm_gr={{CONTACT `subscriber_id`}}

If your link already has a ?, use & instead of the ? at the start of the code. The link maker does it for you.

  1. Under Link maker, paste your sales page's address in Your sales page, for example https://yoursite.com/offer.
  2. Click Make my link.
  3. Click Copy link.

For example, https://yoursite.com/offer?utm_source=email becomes https://yoursite.com/offer?utm_source=email&pm_kit={{ subscriber.id }}. The code stays exactly as your email tool expects it; don't change its spaces or brackets.

Use the whole link from the link maker wherever your email links to your sales page: text links and buttons. Email tools sometimes rename their menus; if a label below does not match exactly, look for the closest one.

  • Kit: in the email editor, select the text or button, click the link icon and paste the link. Kit fills in {{ subscriber.id }} for each subscriber when it sends.
  • Mailchimp: in the email builder, select the text or button, choose to add a link to a web address and paste the link. Mailchimp fills in *|UNIQID|*.
  • ActiveCampaign: in the campaign or automation email designer, select the text or button, edit its link and paste the link. ActiveCampaign fills in %SUBSCRIBERID%.
  • GetResponse: in the email editor, select the text or button, add a link to a web address and paste the link. GetResponse fills in the subscriber_id code.
  1. Send yourself a test email from your email tool (to an address that is a subscriber there).
  2. Click the link in the email you received, and copy the address from your browser, or copy the link from the email.
  3. On Recognise viewers from your emails, paste it under Check a link and click Check.

The answer starts with "Recognised:", followed by the email and the subscriber number at your email tool. The code's card then shows ✓ Seen working. Other answers:

MessageWhat to do
"This link has no PlayerMagick code."Add the code to the link (Step 2).
"This link still has {{ subscriber.id }} in it. Paste the link from an email you received, not from the editor."You pasted the link from your email editor. Use the link from an email you received.
"Kit links aren't set up yet."Connect that email tool in Settings → Integrations.
"Kit has no subscriber 4821. Send the email from Kit to yourself and paste the link you received."The code is not a subscriber of the connected account. Check you sent from the same account.
"… unsubscribed in Kit: automations won't run for them."Unsubscribed people are never recognised.
"Kit didn't answer. Try again in a minute."Your email tool did not answer in time.
"30 checks an hour are allowed. Try again later."Wait a little.

Editors, admins and owners can check links.

Settings

Owners and admins can change these under Settings on the same page:

  • Remember recognised viewers (on by default): "On your site, so they’re recognised on later visits too. Nothing is stored on other sites." Choose for how many days, 1 to 365 (90 by default), counted since their last email link or gate. Turn it off to recognise people for the page view only: nothing is stored on their device.
  • Allow email links (pm_email) (off by default): see Email links with the address.

Click Save settings. "Settings saved. Your pages follow within a minute."

Some email tools can't put a subscriber code in links. Only then, you can put the email address in the link instead:

  1. Turn on Allow email links (pm_email) and choose Email tool for these viewers: "Viewers recognised this way only trigger actions in the email tool you choose for them."
  2. Click Save settings.
  3. Under The code for your email tool, choose Email address and copy the code, for example ?pm_email={{ subscriber.email_address }} (Kit), ?pm_email=*|EMAIL|* (Mailchimp), ?pm_email=%EMAIL% (ActiveCampaign) or ?pm_email=[[email]] (GetResponse).

Use it with care: "The email can end up in browser history and in your page’s statistics tools." Anyone who knows a subscriber's address can make such a link. PlayerMagick recognises the viewer only if that address is an active contact of the chosen email tool, and never creates a contact.

People who type their email

A viewer who enters their email in an email gate, or in a funnel question that asks for it, is recognised too. Because anyone can type any address, automations treat them carefully:

  • Allowed: actions that add something, such as Add tag, Subscribe, adding to a sequence or starting an automation, and webhooks.
  • Not done: actions that remove or overwrite something on the contact, such as Remove tag, removing from an automation or sequence, and Update a field, until the same person comes from one of your email links.

Link codes from your email tool (pm_kit, ck_subscriber_id, pm_mc, pm_ac, pm_gr) recognise people fully.

Good to know

  • The code is read when the viewer plays. It is then removed from the address bar, so a link copied from the page later carries no code. A visitor who never plays your video is not recognised.
  • Every code is checked with your email tool. Unknown codes, and people who unsubscribed, bounced or were cleaned, are never recognised.
  • Forwarded emails. If a subscriber forwards your email and their friend clicks the link, the friend is taken for the subscriber. PlayerMagick cannot tell them apart.
  • Codes can be guessed. Some email tools number their subscribers in order, so a visitor could type someone else's number into the address. PlayerMagick checks every code and recognises at most 3 different people a day from one internet connection. Anyone who has a subscriber's link can be taken for them, so use codes only in emails, and never use automations to give access to paid content.
  • Several devices. A subscriber who clicks on their phone and later on their computer is one person: their watching adds up.
  • Other websites. A viewer is remembered only on the website where they were recognised. Each website's browser storage is its own, and PlayerMagick sets no cookies.
  • About a minute. Automations that depend on watching run about a minute after the moment.

Privacy

Recognition links viewing to people on your email list, for your automations. Say so in your privacy policy, for example: "Our sales pages use PlayerMagick. When you come from one of our emails or enter your email, we link what you watch to your subscription to send you relevant emails."

To turn recognition off on a page (for example one that needs consent first), add data-pm-recognise="off" to the embed's <script> tag, or to any element of the page:

<script async src="https://cdn.playermagick.com/v1/embed.js" data-pm-recognise="off"></script>

On that page, no code is read, nothing is stored on the device and nobody is recognised, also in email gates (their emails are still saved in Leads). See Privacy: what PlayerMagick records.

Troubleshooting

  • Nobody is recognised. Check that the email tool is connected, that the link has the code (use Check a link), and that viewers actually play the video.
  • The code stays in the address bar. It is removed when the viewer plays. If the page has data-pm-recognise="off", it is never read.
  • A subscriber was recognised as someone else. Their device was recognised from another person's link (for example a forwarded email). The next link they click from their own email switches it.
  • The "Seen working" badge doesn't appear. It shows once a viewer was recognised from that tool's links in the last 30 days, or after a successful Check a link.

Was this article helpful?